CAT7 Bulk Ethernet Cable, 10G Dual Shielded Solid Copper S/FTP 23 AWG 1000FT

Specially designed for Volp,ISDN,Token,100MTP-PDM, Analog and Data Video,TR-16 Active And Passive,155M/662m/1.2GATM,andforIEEE802.3:100Bease, 100Base-T,1000Base-T and 10G Base-T. Specially designed for10G Ethernet transmission with testband width up to 600MHz.

Product Description

Our S/FTP shielded CAT7 cable is ideal for voice, data, video and security applications. The CAT7 Cable is the premier solution for your network installation. Whether you are wiring your home, office or entire campus, we have the cable that's right for you.

This CAT7 cable is a high speed 10 Gigabit Bulk Cable which consists of a 4 Pair / 8 Conductor configuration. These twisted pairs are individually shielded in order to repel electromagnetic interference (EMI) in electrically noisy environments. This CAT7 Cable is designed with an Overall Tin-Copper Braid for extra interference protection. Additionally, this cable has a tinned copper drain wire which grounds the electricity after it has been terminated. This drain wire is required on all shielded cable in order to prevent signal loss, cross-talk, and other performance issues. Our CMR Riser Rated Cable is comprised of 23AWG Solid-Bare Copper Conductors which are protected by an indoor rated gray PVC Jacket. This cable is only available in 1000' increments on a Wooden Spool.

Our solid CAT7 cable has individually shielded pairs (S/FTP), and is quality manufactured to meet and or exceed product certifications such as CAT7 T568C.2 standards.

Certifications

REFERENCE STANDARD

UL IEC60332-1 IEC60332-3-24 EN50399

TEST STANDARD

TEST STANDARD ISO / IEC11801 ANSI / TIA-568-C.2

Product Specs

PHYSICAL PARAMETERS
Conductor 23AWG Solid Bare Copper, 0.58 ± 0.005mm
Insulation material: Skin Foam Skin Polyethylene
Insulation diameter: 1.33 ± 0.05mm
Wire pair shielding: aluminum foil
Braided shield: tinned copper or aluminum-magnesium alloy wire, coverage rate ≥40%
Sheath diameter: 7.6 ± 0.5mm
Sheath material: PVC or LSZH low smoke halogen-free
Working temperature: -30 ℃ to 50 ℃ (LSZH)
MECHANICAL PARAMETERS
Tensile strength before aging: ≥13.5Mpa (PVC), ≥10.0Mpa (LSZH low smoke halogen-free)
Elongation before aging: ≥150% (PVC), ≥125% (LSZH low smoke halogen-free)
Aging time: 100 ℃ × 24 hours × 7 days
Tensile strength after aging: ≥12.5Mpa (PVC), ≥8Mpa (LSZH low smoke halogen-free)
Elongation after aging: ≥125% (PVC), ≥100% (LSZH low smoke halogen-free)
Cold bending (-20 ± 2 ℃ × 4 hours): 8 times the outer diameter of the cable without cracking
ELECTRICAL PARAMETERS
Transmission delay difference: ≤25ns / 100m
Transmission speed: 74%
Unbalanced capacitance to ground: maximum 330pf / 100m
DC resistance: Maximum 9.5Ω / 100m
DC resistance unbalance: max 2%

Applications

×

Contact Us

captcha
×

Inquire

*Name
*Email
Company Name
Tel
*Message