ADSS Fiber Optic Cable

Adopted to the communication environment with high-voltage transmission network,lightning-prone areas and large span by the laying method of aerial.

 

 

PRODUCT DESCRIPTION

ADSS cable is loose tube stranded. Fibers,  125μm , are positioned into a loose tube made of high modulus plastics. The tubes are filled with a water-resistant filling compound. The tubes (and fillers) are stranded around a FRP (Fiber Reinforced Plastic) as a non-metallic central strength member into a compact and circular cable core. After the cable core is filled with filling compound. it is covered with thin PE (polyethylene) inner sheath. After stranded layer of aramid yarns are applied over the inner sheath as strength member, the cable is completed with PE or AT (anti-tracking) outer sheath.

 

  

Characteristics: 
        · Can be installed without shutting off the power
        · Excellent AT performance, The maximum inductive at the operating point of AT sheath can reach
             25kV
        · Light weight and small diameter reducing the load caused by ice and wind and the load on towers
             and backprops
        · Large span lengths and the largest span is over 1000m
        · Good performance of tensile strength and temperature
        · The design life span is 30 years     
 
Application:
The actual status of overhead power lines is taken into full consideration when ADSS cable is being designed. For overhead power lines under 110kV, PE outer sheath is applied. FOR power lines equal to or over 110kV, AT outer sheath is applied. The dedicate design of aramid quantity and stranding process can satisfy the demand on various spans.
 
Standards:
    ADSS cable complies with Standard IEEE P 1222 as well as IEC 60794-1.
Storage/Operating Temperature : -40℃ to + 70℃

 

 

 

PARAMETER

 

Ref.outer diameter (mm) Ref.weight  (kg/km) Ref.daily max.working tension   (kN) Max allowable working tension (kN) Break strength                (kN) Strength member CSA Modulus of elasticity kN/ mm2 Heat expansion coefficient ×10-6 /k 
12.5 125 136 1.5 4 10 4.6 7.6 1.8
13 132 142 2.25 6 15 7.6 8.3 1.5
13.3 137 148 3 8 20 10.35 9.45 1.3
13.6 145 156 3.6 10 24 13.8 10.8 1.2
13.8 147 159 4.5 12 30 14.3 11.8 1
14.5 164 177 5.4 15 36 18.4 13.6 0.9
14.9 171 185 6.75 18 45 22 16.4 0.6
15.1 179 193 7.95 22 53 26.4 18 0.3
15.5 190 204 9 26 60 32.2 19.1 0.1
15.6 194 208 10.5 28 70 33 19.6 0.1
16.3 211 226 12.75 34 85 40 20.1 0.1
16.8 226 242 15.45 41 103 48 24 -0.4
17.2 236 253 16.2 45 108 51 25.1 -0.5
17.9 249 266 18 50 120 58.8 26.1 -0.8

 

Ref.outer diameter (m) 
mm Suitable span
  (NESC Standard,m)
  A B C D
12.5 160 100 140 100
13 230 150 200 150
13.3 300 200 290 200
13.6 370 250 350 250
13.8 420 280 400 280
14.5 480 320 460 320
14.9 570 380 550 380
15.1 670 460 650 460
15.5 750 530 750 510
15.6 800 560 800 560
16.3 880 650 880 650
16.8 1000 750 1000 760
17.2 1100 800 1100 830
17.9 1180 880 1180 900

 

RELATED PRODUCTS

Cat5e Bulk Ethernet Cable,Solid Copper UTP 24AWG 1000FT

This CAT5E Cable is the perfect fit for reliable installations where the cable will be used indoors. This cable's 8 conductors (4-Pairs) are solid bare copper with a high density polyethylene (HDPE) insulation and a PVC CM/CMR/CMP rated RoHS Compliant jacket. It's designed for indoor LAN applications, making it the ideal solution for indoor installation runs that require the cable to be installed in walls or any other non-plenum areas. This cable is also tested up to speeds of 350MHz.

VIEW DETAILS
Cat6 Bulk Ethernet Cable,Solid Copper UTP 23AWG 1000FT

Our CAT6 Bulk Ethernet Cable, Solid Copper UTP, 23 AWG 1000FT is an excellent choice. Supplied in a pull box, this 23 AWG cable is composed of four color striped twisted pairs (8 Conductors) made of solid copper. These conductors are surrounded by HD-PE insulation and Flame Retardant PVC/LSZH jacket that is RoHS Compliant, making it an ideal solution to installations in data room/ office/hotel, rated locations.

VIEW DETAILS
Cat6A Bulk Ethernet Cable,500Mhz ,Solid Copper UTP 23AWG 1000FT

CAT6A Bulk Ethernet Cable, Solid 23AWG 1000FT 10G 500Mhz This cable comes in 6 color variations, supplied on a wooden spool. In addition, this network cable is manufactured with a low smoke generating FR-PVC jacket to resist sweltering and the spreading of toxic fumes in the case of a fire. The 23 AWG solid copper conductors are arranged into four color striped pairs to facilitate installation.

VIEW DETAILS
×

Contact Us

captcha
×

Inquire

*Name
*Email
Company Name
Tel
*Message