What Are the Features of an Optical Cabling System?

Views: 307 Author: Site Editor Publish Time: Origin: Site

A network cable with glass fiber strands inside of an insulated housing is known as a fiber optic cable and collectively referred to as optical cabling system. They are made for telecommunications and long-distance, high-performance data networking.

Fiber optic cables offer a higher capacity and can carry data over greater distances than conventional wires. The majority of the internet, cable television, and phone systems in use today are supported by fiber optic connections.

In this article, I will be taking you through some basic features of a fiber optic cable. While not sitting in a well-ventilated room as you read through this article.

Features of an Optical Cabling System

Being well-groomed with the basic features of fiber optic cable will help you in making the right choice of fiber. Below are some basic features of fiber optic cable;

Metalized Fiber optic cable

For improved thermal resistance, soldering, and severe conditions, are coated with metals. The operating temperature is a crucial environmental factor to take into consideration.


The most expensive transmission method is fiber optic cable. Most businesses believe that extending fiber to every PC is impossible due to the expense.

Fiber optic transmitters and connecting equipment can cost up to five times as much as UTP network-specific equipment, in addition to the cable itself being more expensive than copper cabling.

Also, hiring knowledgeable twisted pair cable installers is less expensive than engaging experienced fiber cable installers. But, as technology advanced, fiber optic connections became more affordable.

Noise immunity

Fiber is unaffected by EMI since it does not use electrical current to transfer signals. One reason fiber can go such great distances without needing repeaters to recycle its signal is its outstanding noise resistance.

Size and scalability

Optical loss, or the degrading of the light signal after it has traveled a certain distance from its source, is the main cause of the limit. Long-distance optical loss accumulates and increases with each fiber network connection point.

Optical loss can get worse if there is dust or grease in a connection. Fiber-optic cable can transport signals over distances of up to 40 miles in some cases, but only up to one mile in others.

Light's wavelength can affect how far it can travel along a cable. The existence of a single mode cable is another factor.


Standard or Straight Tip Connectors may be used in fiber networks. On the most recent fiber optic technology, local connector and mechanical transfer registered jack connectors are employed.

The reduced size of LC and MT-RJ connectors makes them preferred to ST and SC connectors, allowing for a higher density of connections at each termination point.

The MT-RJ connector is special because it has two fiber strands in a single ferrule. A ferrule is a small tube inside a connector that encircles the fiber and maintains its alignment.

Full-duplex signaling is possible with just one MT-RJ connector and two strands in each ferrule. Because fiber optic cables are available with many connector types at either end, connecting devices that require various connectors is a simple process.

Contact us for quality fiber optic cables

Fiber optic cables are used in institutions, ICT centers, and other sectors in the country. Making a good choice of fiber optic cables is very vital because it helps in determining how durable the product is.

Having gone through the basic features of fiber optic cables why not contact us for more information?


Contact Us



Company Name